Reducing Cattle Feeding Costs

Source: Saskatchewan Agriculture and Food

With grain prices on the rise and margins shrinking for cattle producers, the time is right to look at the advantages of feeding lower grade grain such as light test weight barley.

Earlier this fall, cash prices for 1CW barley were as high as $167.12 per tonne, or $3.64 per bushel. Prices have dropped slightly and are currently about $153.00 per tonne, or $3.33 per bushel (in-store Saskatoon).

"With these higher prices for heavy feed barley, lighter test weight barley purchased at discounted prices may be an attractive option for cattle producers," said Saskatchewan Agriculture Livestock Development Specialist Bryan Doig.

This year, barley harvested in many locations across the province had lighter bushel test weights due primarily to dry conditions and high temperatures during the month of July.

"Many feedlots apply significant discounts for lighter barley and often refuse to purchase barley that is lighter than 42 pounds per bushel," said Doig.

Doig cites research done at the University of Alberta that compared the performance of feed steers fed finishing rations containing light test weight barley to rations with heavy barley.

"There were no differences in average daily gains or days to finish, comparing 34.5 pound, 47.3 pound, and 51.3 pound barley in finish feedlot rations," said Doig. "There were no differences in carcass weights, dressing percentage, rib-eye area or back fat depth between the three barley weights."

According to the Alberta study, steers gained an average of 3.6 to 3.7 pounds per day with a start weight of 867 pounds and a finish weight of 1162 pounds. It took 6.29 pounds of dry matter to get one pound of gain for the light barley, compared to 5.9 pounds of dry matter to get one pound of gain for the heavy barley.

"The dry-matter-to-gain ratio was six per cent higher for the light barley," Doig said. "The light barley contained more fibre and less starch than the heavy barley."

Doig notes that the main problem producers may encounter with light test weight barley is the variability in kernel size, because small kernels mixed with large kernels can make rolling the feed a challenge.

"Barley should be milled or ground to increase its digestibility," he stated. "This usually increases the feed efficiency by 20 per cent or more. Breaking the barley into two or three pieces is all that's required to expose the starch."

These findings are important, since 2007 is looking like a record year for the prices of top grade grains of all varieties. As a result, the feed grain market will be under pressure over the next several months, and innovative approaches will be required to manage feeding costs, especially in a time of flattening cattle prices.

"Lighter test weight barley at discounted prices could help offset high feed grain prices, it's that simple," Doig said. "This may provide an opportunity for producers to reduce feeding costs for wintering cows, backgrounding, and finisher calves."

For more information, contact:
Bryan Doig, Livestock Development Specialist
Saskatchewan Agriculture
Phone: (306) 446-7477
E-mail: bdoig@agr.gov.sk.ca

Comments